 | | Heat Regenerated Desiccant Dryers | |
Technical specification
Series: DN/DW
Flow rate: 4.7 to 194.2 m³/min
Pressure dewpoint: down to -40 °C
|
 |
| Compressed air dried to dewpoints as low as -40°C is often needed
as process air, for frost-prone areas or in sensitive industries
such as electronics, foodstuffs, pharmaceuticals and brewing. Such
high degrees of moisture removal are achieved by KAESER’s series
DN/DW desiccant dryers. The use of heat regeneration ensures that
very little compressed air is needed for purging (DN 0%, DW
2%). The desiccant is regenerated with externally heated blown
air. |
Advantages:- Particularly low energy demand thanks to efficient thermal insulation and very low purge air demand
- Equipped with temperature monitoring for further energy savings
- Generous volume of desiccant charge for secure drying
- Even flow through the desiccant bed ensured by the stainless steel flow diffuser
- Designed for 100% continuous loading
- Large section pipework for minimum pressure drop and energy costs
- PLC controller with operating panel and full instrumentation for ease of operation
- Supplied with inlet and outlet filters, each fitted with filter monitors and the inlet filter with an ECO DRAIN electronic condensate drain
|
|
